Tag Archives: Nashville TN Asphalt Patching

Sealcoating & Striping

Your Guide To Residential Asphalt Driveways

Hargrove SealcoatingHomeowners know that a cracked and neglected driveway affects the overall aesthetic of a property. If you’re still deciding whether or not paving your driveway is a good investment, wonder no more. Laying an asphalt driveway or repairing cracked asphalt will enhance your property’s long-term value and curb appeal.

It only takes one to two days to lay an asphalt driveway if it is done by a professional contractor, and you don’t have to wait a long time to start using it again. While residential paving expenses will depend on your location and specific requirements, it is generally affordable. However, there are factors to consider to make sure your driveway paving lasts and functions as it should. Here are some of them.

Driveway Foundation

Your driveway’s foundation must be sufficiently compacted before any paving work can be started. Failing to have a proper foundation can make or break the quality of the asphalt pavement.  Make sure cracks and holes are filled out, and there’s a drainage system in place. 

Drainage

Having an effective drainage system is crucial to an asphalt driveway’s quality and durability. Water should never be stagnant on the pavement’s surface; neither should it pool around the edges. To prevent water stagnation, driveways are usually raised in the center and built lower along the sides.

Patio and walkway drainages should be kept further away from the driveway.

Tack Coating

This helps the asphalt overlay adhere to the foundation. Tack coating is usually sprayed on a deteriorating surface to ensure its evenness before adding the asphalt overlay.

Paving Material

Your choice of paving materials would depend on the specific demands of the project. In some cases, an aggregate base may be the best choice. In others, a full-depth asphalt application would be highly recommended. A professional contractor such as Hargrove Sealcoating will survey the area to determine the best pavement material for the job.

Pavement Width

A one-car driveway would typically require a width of 8 feet. But it is recommended to set the width at 10 feet so there’s enough space for larger vehicles.

Expand the width to 12 feet if you want to accommodate pedestrians, too.

Pavement Thickness

Asphalt contractors would either use asphalt over an aggregate base or use asphalt all the way through. Asphalt thickness will differ depending on which case. An asphalt overlay would be at 1.5 to 2.5 inches, whereas a full-depth asphalt pavement would be at 5 to 6 inches total.

Asphalt Surface Course Application

The surface course is the top layer of the pavement and it should be laid in such a way that it is able to withstand high traffic and environmentally-induced stresses without cracking or rutting. It aims to provide an even profile with just the right amount of texture to ensure sufficient and safe skid resistance.

Location

Your driveway’s location should consider your property’s natural topography. An area that is too flat an area will cause drainage problems while an area with steep slopes could become slippery and dangerous. As a rule of thumb, a driveway should have a grade of less than 15 percent, which means that it should not rise more than 15 feet over a distance of 100 feet. 

Surrounding trees and natural features should be taken into consideration in the construction of your driveway.

Everyday Traffic

While cars do not damage the surface of your driveway, heavy-duty vehicles parked regularly on your driveway can. It is recommended that trucks should not park on your driveway for at least a year after the paving work is completed.

Sealing

Asphalt driveways last for about 25 to 30 years. With regular sealcoating, or the application of a protective coating against the elements, your driveway could possibly last longer than that.

Maintenance

Cracks, potholes, and ruts should be repaired as soon as possible as these could speed up the deterioration of your residential asphalt paving. Asphalt patching is a fast and effective solution to these concerns.

Serving Columbia, Spring Hill, Franklin, Brentwood, Thompson’s Station, Lewisburg, Murfreesboro, and Nashville, Hargrove Sealcoating specialists provide asphalt crack repair services. Call them today at 931.619.6718. One of their service advisors will be happy to assist you.

General

When Is The Best Time To Asphalt Your Driveway?

Hargrove Sealcoating
A new asphalt driveway can elevate the look of your home. It’s a durable surface where you can walk or park your car. To make it last for several years, asphalt must be properly installed under optimal conditions by an asphalt paving professional.

Choosing The Best Conditions For Asphalt Work

In its workable state, asphalt is viscous, flexible, and easy to pour and spread across a surface given the right environmental settings. Asphalt can be difficult to manage when it’s too cold outside, and teams would need to work quickly before the asphalt cools and hardens. On the other hand, it can take longer for asphalt to cure when it’s too hot. The ideal temperature would be somewhere near 70 degrees. This typically happens in spring, late summer, or early fall depending on where you live.

Why Precipitation Matters

Precipitation is another important factor to consider when planning asphalt paving work in Nashville. Water seeping into the sub-base will freeze during winter, which causes it to expand and damage the asphalt above. Heavy rainfall can cool down the asphalt surface before the team could have the chance of properly leveling the material.

Review Project Timelines

The amount of work to be done on your driveway will affect the timing of your asphalt paving project. It could only take 1 to 2 days to refresh an existing driveway, but it can take a week if you are planning to install a new one entirely. Consult with a Nashville-based asphalt paving contractor and schedule your project accordingly.

Remember: The first two weeks are the most crucial for your new asphalt driveway; it is still vulnerable and prone to breakage during this time. Do not drive on it for 3 to 5 days, and wait for up to 7 days before parking a vehicle on it. If you do, park in the early morning or in the evening when temperatures are lower.

For your asphalt paving and repair requirements, call Nashville-based Hargrove Sealcoating at 931.619.6718 for a free consultation and quote. One of their service advisors will be happy to assist you.

Business

Hargrove Sealcoating: What is Asphalt Patching?

Hargrove SealcoatingIf you’ve driven down a Nashville interstate lately, anywhere from Franklin to Murfreesboro, you’ve probably seen – and felt – a pothole. Potholes are an unpleasant after-effect of freezing or rainy weather, but they can be repaired. Here, Hargrove Sealcoating offers information on how potholes form and different asphalt patching methods.

Q: How are potholes formed?

Hargrove Sealcoating: Potholes are the result of a weak spot in the road. They usually form after a hard freeze, and especially in areas where salt is used on the roadway. As precipitation touches the ground, it melts and seeps into tiny cracks and fissures in the asphalt. Once this freezes, it expands, which destabilizes the integrity of the road or driveway’s surface. These weak spots are continually exposed to thousands of pounds of pressure with each passing vehicle. They eventually turn into potholes. When salt is introduced to the road, water freezes and thaws more rapidly, which allows for more damage.

Q: What is asphalt patching?

Hargrove Sealcoating: Asphalt patching refers to the process of repairing damaged roadways, commercial parking lots, or residential driveways. There are a few commonly-used asphalt patching techniques. On Nashville roads, a spray injection might be used, especially when repairs are urgent and weather conditions are unfavorable. This is done by a professional and requires specialized equipment. A semi-permanent patch requires a more hands-on approach, and surface preparation is required. During this process, loose gravel, broken asphalt, and other debris are blown from the damaged area. The perimeter of the pothole is extended slightly before a hot or cold asphalt patching mix is poured and compressed.

Q: What is the difference between hot and cold asphalt patching?

Hargrove Sealcoating: Cold patching is a great solution for small potholes or minor cracks. You don’t have to wait for a long stretch of sunny days to use this method. One of the benefits of cold patching is that it can be used immediately, and might help prevent further damage. Hot, or infrared, asphalt patching is commonly used in Nashville, Franklin, and Murfreesboro as it is ideally suited for large areas.

Q: Can a homeowner fix their own driveway?

Hargrove Sealcoating: For small imperfections, yes. In fact, you can get a bucket of cold patch material at your local Lowe’s or Home Depot. Unfortunately, for damage larger than just a few inches in circumference, these DIY repairs may not be as long-lasting as a homeowner would like. Further, if the driveway has multiple areas or requires foundation restoration, simply adding an asphalt emulsion won’t get the job done. Professional asphalt patching is the best solution for a driveway with multiple potholes, cracks, or vegetation growth.

Q: How can sealcoating extend the life of my driveway?

Hargrove Sealcoating: Once your asphalt patching repair is complete, your driveway should be properly sealcoated to help protect the surface from the elements. Sealcoating requires temperatures of at least 50° and dry weather, but it is a crucial step in the process that can extend the life of your driveway. Most asphalt surfaces should be sealcoated once every few years or when it begins to fade and show signs of wear.

For more information about asphalt repairs and service in Franklin, Nashville, or Murfreesboro, call Hargrove Sealcoating at (931) 619-6718.